Auto Finesse® Total is a ready to use all-purpose car interior cleaner which is safe to use on all interior car surfaces. Whether you are cleaning plastic, vinyl rubber, cloth, or carpet, Total’s sophisticated low-foaming surfactants will not disappoint.
From modern ‘soft-touch’ plastics, to badly stained carpets, or even neglected vintage vinyl, Total is up to the task.
Auto Finesse® Total’s gentle nature makes it well suited for sensitive cleaning operations, but is also capable of tackling a wide variety of tough organic, and inorganic based stains. Oil, grease, food, coffee, mildew, grass, mud, sun-tan lotion and silicone-based dressings can all be removed with ease.
Vinyl, Plastic and Rubber:
For light soiling, spray Total directly onto a general purpose microfibre towel and wipe onto surface. Switch to a dry general purpose microfibre towel and buff off any residues, revealing a perfectly clean finish. If heavier soiling is present, spray Total directly onto the surface to be cleaned, allow dwelling momentarily, and agitate with a soft, short-bristle brush. You can then use a general purpose microfibre towel to soak up the remaining product and grime. Regularly re-fold, and periodically change your microfibre towels during the interior cleaning process.
Spot removal on textiles:
For quickly removing stains and spills on fabric and carpeted surfaces, spray Total directly onto the spot until saturated and allow to dwell for 1-2 minutes. If necessary, work the product into the surface with a soft, short-bristle brush to help break down the stain. Once lifted, you can blot the surface with a dry, general purpose microfibre towel to soak up the remaining product. If the stain remains, repeat the process.
To deep clean fabric and carpets, begin by dry vacuuming the material to remove any loose dirt. Liberally spray Total directly onto the area, until the surface is damp with product. Allow the product to dwell for 1-2 minutes. Wet a soft, short-bristle brush in a bucket of water and agitate the area. You can then rinse the material with clear water and use a wet/dry vacuum or carpet extractor to remove the excess product. Repeat the process until the extracted rinse water stays clear.